E-Series Electric Motor Dynamometer

I900 E Specs

Hp: 900 Hp (671 Kw) @ 3600, 600 Hp (447 Kw) @ 1800
Torque: 3200 Ft. Lbs (4336NM)
Speed: 0-3600 RPM
Coolant Capacity: 165 Gal (662 Ltr)
Shipping Weight: 1800 Lbs.
Operational Weight: 3200 Lbs.
Instrumentation: 2000 Series Computer

Electric Motor Dynamometer Time Saver Adapter

* E-Series Dynamometers comes standard with time saver adapter

E Series

Model	Torque Rating Ft/Lbs	N-m	@1800 RPM	@3600 RPM
I300 E	1000	1355	200	300
I600 E	2100	2850	400	600
I900 E	3200	4336	600	900

Accessories

*Self-Contained coolant supply of water serves as a ballast weight for high-torque applications. Water must be added as required when testing in excess of prescribed testing time.

*Overheating safety fuse automatically drops the torque load when water temperature reaches 180-190 Deg. F(82-88 Deg. C)

*All units are equipped with Shear Pin Release and Safety shields.

*Dynamometer is ready for operation immediately upon receipt. An AW Representative follows your new AW Dyno and trains all key personnel in its use and maintenance until satisfied.

JETest Motor Test Systems

AC High Voltage Module
Configured for 1200, 2400, 4200, 4800 and 7200VAC applications.

AC Low Voltage Module
Configured for 0 - 600VAC applications.

DC Field And Armature Module
Configured for 1000VDC maximum applications.

AC - acquires and displays line to line voltages and currents, input power and power factor.

DC - acquires and displays field and armature voltages and currents and input power.

Temperature and Vibration Acquires and displays data from four, configurable temperature and vibration points. Package includes thermocouples accelerometers, data acquisition hardware and necessary cabling.

Data Management Automatically creates a searchable database of test results. This allows users to search test results by customer name, job number, serial number, manufacturer or date range. It also allows reprinting of historical test data for analysis.

Water Requirements (Continuous Testing)

Incoming Water Temperature °F				Gallons	Per	Minute
40°	5	10	15	20	25	30	35	40	45
50°	6	12	18	24	30	36	42	48	54
60°	7	14	21	28	35	42	49	56	63
70°	8	16	24	32	40	48	56	64	72
80°	9	18	27	36	45	54	63	72	81
90°	10	20	30	40	50	60	70	80	90
100°	13	26	39	52	65	78	91	104	117
110°	17	34	51	68	85	102	119	136	153
Horsepower	100	200	300	400	500	600	700	800	900

* Example: 60°F water requires 7 gpm to test 100 H.P.

*Return lines from the dynamometer back to the cooling system or drain must be of the correct size as not to create more than 8-10 P.S.I of back pressure on the dynamometer�s tank. Water must be forced through the system for proper cooling.

*It is intended to create a pressure drop from the incoming water 30-60 P.S.I down to a maximum of 8-19 lbs on the outlet. Pressures greater than 8-10 lbs. on the dynamometer tank will reduce water seal life.

About Us Used Equipment Distributors